APC Smart-UPS VT 20kVA 400V w/4 Batt. Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability (SUVTP20KH4B4S)

Output
Max Configurable Power (Watts)16.0kWatts / 20.0kVA
Output Voltage NoteConfigurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Output Voltage DistortionLess than 5 % at full load
Output Frequency (sync to mains)47 - 53 Hz For 50 Hz nominal Sync to mains, 50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised
Other Output Voltages380 V, 415 V
Load Crest Factor3 : 1
TopologyDouble conversion online
Waveform typeSine wave
Maximum Output Current32
BypassBuilt-in maintenance bypass, Built-in static bypass
Input
Input frequency40 - 70 Hz Auto-sensing
Input voltage range for main operations304 - 477V
Other Input Voltages380 V, 415 V
Input Power Factor at Full Load0.98
Batteries & Runtime
Battery typeVRLA
Included Battery Modules4
Typical recharge time5hour(s)
Nominal Battery Voltage+/- 192 V (split battery referenced to neutral)
Expected Battery Life (years)3 - 5
RBC Quantity4
Battery Charge Power (Watts)1.958kWatts
Extendable Run Time1
End of Discharge Battery Voltage+/- 154 V

Smart-UPS VT Features & Benefits
Marketing features
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
Manageability
LCD displayAlpha-Numeric Display which displays system parameters and alarms.
Audible alarmsProvides notification of changing utility power and UPS power conditions
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
LED status indicatorsQuickly understand unit and power status with visual indicators.
Programmable frequencyEnsures compatibility with different input frequencies.
Network manageableMost models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
SmartSlotCustomize UPS capabilities with management cards.
Availability
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Scalable runtimeAllows additional run time to be quickly added as needed.
Battery modules connected in parallelDelivers higher availability through redundant batteries.
Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
Total cost of Ownership
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Input Power Factor CorrectionMinimizes installation costs by enabling the use of smaller generators and cabling.
Sustainability
EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Serviceability
Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.
Modular designProvides scalability, N+1 redundancy, fast serviceability, and reduced maintenance requirements via self-diagnosing, swappable, and field-replaceable modules.
Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Protection
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Cold-start capableProvides temporary battery power when the utility power is out.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.